Dental Loupe A Tool
Testimonials Customer feedback
Stac Loupe - new launch
STAC Diamond Burs Press Release
Trade Shows
About Company
Privacy Policy
Terms and Conditions
Login
Contact Us
Where to Buy
Diamond Burs
STAC Triple Action FG Diamond Burs
Say Goodbye to Debris and Clogging
What is the biggest problem every endodontists, periodontists or dental surgeons face while performing routine dental procedures.
Cleaning Debris from burs and from mouth
interruption due to heating up of burs
No more debris and heating problems
ACTS Medical introduces a breakthrough technology in FG diamond burs.
STAC Triple Action FG Diamond Burs
STAC Triple Action Burs incorporate a unique opposite spiral channel which move collected water upward creating a fountain of water and debris allowing debris to get sucked away. Therefore making the endo/surgical procedures clean and debris free. It helps to keep burs cool, and increases the efficiency of endo/surgical procedures. One can save as much as 50% of time as compare to standard FG burs available in the market.
- REDUCING PAIN Water through the channels, the optimal spray water can help heat decreasing when cutting reduces danger of pulp lesion and improved diamond life.
- RAPID HEAT DISSIPATION The opposites spiral channels create a double “TURBO” spray action Rotational forces recover the watered from the surface and convey if to the working point along the grooves. This allows longer contact of the cooling spray with the instrument and a more efficient thermal exchange. The result is less tooth trauma.
- SELF REMOVAL OF DEBRIS The opposites spiral channels create a “TURBO” flow of cooling, lubricating spray which flushes away debris and prevents clogging.
- SHARP-EDGED (saving 50% time) The patented design Multi-cutting edge, the point of each edge has penetration power, resulting in smooth and quick cutting which saves time as much as 50% from time taken by traditional burs.
Take a look at the comparative advantage chart below.
Traditional Bur |
STAC Triple Action Bur |
| Debris stay in diamond | Debris removed with water |
| Friction heat increases | reduces friction heat |
| Can not be lubricated | Self lubricated with water |
| Only one cutting edge | Multi cutting edges |
| Longer time to complete procedure | short time to complete similar procedure |
| Short cutting life | Long cutting life |
| Needs pressure to cut through | Easy and smooth cut through |
A Laboratory study was done on the efficiency of different diamond burs. The purpose of this laboratory study was to investigate the comparative cutting efficiency of similar FG diamond burs from four manufacturers. These burs were tested utilizing custom-built equipment consisting of a frictionless air sled to which the Macor substrate was attached. The substrate was fed to the bur at constant pressure. The efficiency of each bur, defined as time taken to cut the distance of 3mm, then was calculated. Of the six bur types tested, only one was found to be markedly superior in comparable performance. Below is the results of the test to cut through Macor Substrate for 3mm distance. Four brand of burs were taken Mani Dia Burs, Japan; Shofu, Japan; Sharply, USA; STAC Triple Action, Canada. 5 similar size of burs were taken from each brand and 5 tests were performed for each size. Therefore a total of 25 tests were performed for each brand. A mean average was taken for comparison. As the chart shows, STAC Triple Action FG Diamond Brus were quickest to cut through the Macor Substrate.
